PROJECTCARS.IO

The previous RAZO foot pedals we installed were a source of endless frustrations as they were way too large for the cramped footwell of the Exocet.

One of the improvements we’ve been meaning to make is to close up the hole below the windshield. The windshield that we had installed floated in the middle of the cockpit and does

On our first track day, we felt the Exocet had a lot of body roll while turning aggressively which isn’t a surprise since we are still using OEM shocks and springs.

We have been working on the Exocet for over 2 years now and today is the day we finally test out all our hard work on the Exocet at a track.

We are just days away from our first track weekend at Laguna Seca Raceway so we took the car out for a final endurance run to ensure the Exocet could survive the two

While our tires of choice on the track are a set of Nitto NT01 Competition Tires, we got a second set of tires and wheels more for our every day street driving. We

As we draw closer to our first track day, we put the finishing touches on the Exocet. To improve our shifting, we are installing the Raceseng Slammology Gate 4 Shift Knob.

We are retaining most of the Miata’s electrical system on our Exocet but we have upgraded the turn signals to the Maxxima Round 21 LED Lights. The unfortunate side effect to this are

The Exocet kit does not include a windshield, nor is there even an option to add one from Exomotive. After lots of research, we found one person whom were making them custom to

We finally picked up the Exocet hood from storage and we can finally complete the look of the car. To secure the hood to the frame, we install AeroCatch Hood Pins on the